Electrolytic Capacitor

An electrolytic capacitor is a type of capacitor that uses an electrolyte (an ionic conducting liquid) as one of its plates to achieve a larger capacitance per unit volume than other types, but with performance disadvantages. All capacitors conduct alternating current (AC) and block direct current (DC) and can be used, amongst other applications, to couple circuit blocks allowing AC signals to be transferred while blocking DC power, to store energy, and to filter signals according to their frequency. Most electrolytic capacitors are polarized; hence, they can only be operated with a lower voltage on the terminal marked "-" without damaging the capacitor. This generally limits electrolytic capacitors to supply-decoupling and bias-decoupling, since signal coupling usually involves both positive and negative voltages across the capacitor. The large capacitance of electrolytic capacitors makes them particularly suitable for passing or bypassing low-frequency signals and storing large amounts of energy. They are widely used in power supplies and for decoupling unwanted AC components from DC power connections.

Supercapacitors provide the highest capacitance of any practically available capacitor, up to thousands of farads, with working voltages of a few volts. Electrolytic capacitors range downwards from tens (exceptionally hundreds) of thousands of microfarads to about 100 nanofarads—smaller sizes are possible but have no advantage over other types. Other types of capacitor are available in sizes typically up to about ten microfarads, but the larger sizes are much larger and more expensive than electrolytics (film capacitors of up to thousands of microfarads are available, but at very high prices). Electrolytic capacitors are available with working voltages up to about 500V, although the highest capacitance values are not available at high voltage. Working temperature is commonly 85°C for standard use and 105° for high-temperature use; higher temperature units are available, but uncommon.

Unlike other types of capacitor, most electrolytic capacitors require that the voltage applied to one terminal (the anode) never become negative relative to the other (they are said to be "polarized"), so cannot be used with AC signals without a DC polarizing bias (non-polarized electrolytic capacitors are available for special purposes).

Leakage current, capacitance tolerance and stability, equivalent series resistance (ESR) and dissipation factor are significantly inferior to other types of capacitor, and working life is shorter. Capacitors can lose capacitance as they age and lose electrolyte, particularly at high temperatures. A common failure mode which causes difficult-to-find circuit malfunction is progressively increasing ESR without change of capacitance, again particularly at high temperature. Large ripple currents flowing through the ESR generate harmful heat.

Two types of electrolytic capacitor are in common use: aluminum and tantalum. Tantalum capacitors have generally better performance, higher price, and are available only in a more restricted range of parameters. Solid polymer dielectric aluminum electrolytic capacitors have better characteristics than wet-electrolyte types—in particular lower and more stable ESR and longer life—at higher prices and more restricted values.

Read more about Electrolytic Capacitor:  History, Construction, Polarity, Electrolyte, Electrical Behavior of Electrolytics, Capacitance, Types, Reliability and Length of Life

Other articles related to "electrolytic capacitor, capacitors, electrolytics, capacitor, electrolytic":

Capacitor Plague - Electrolytic Capacitor Failures After 2007
... SEM image and EDX fingerprint analysis Surface of "fresh" anode from a 1000 uF/10 V electrolytic capacitor the pore openings in the anode are clearly visible, the surface is covered with ...
Types Of Capacitor - Comparison
... Features and applications as well as disadvantages of capacitors Capacitor type Dielectric Features/applications Disadvantages Ceramic capacitors Ceramic Class 1 ... in voltages up to 15,000 V Low permittivity ceramic, capacitors with low volumetric efficiency, larger dimensions than Class 2 capacitors Ceramic Class 2 ... Slightly microphonic Film capacitors Metallized film capacitors PP, PET, PEN, PPS, (PTFE) Metallized film capacitors are significantly smaller in size than film/foil versions and have self-healing properties ...
Electrolytic Capacitor - Reliability and Length of Life
... for verification Aluminum, and to a lesser extent tantalum, electrolytics have worse noise, leakage, drift with temperature and aging, dielectric absorption, and inductance than other types of ... is a problem for most aluminum capacitors for most types, capacitance falls off rapidly below room temperature while dissipation factor can be ten times higher at −25 °C than ... At high temperature, the water can be lost to evaporation, and the capacitor (especially the small sizes) may leak outright ...
Electronic Component - Passive Components - Capacitors
... Capacitors store and release electrical charge ... Capacitor Integrated capacitors MIS capacitor Fixed capacitors Ceramic capacitor Film capacitor Electrolytic capacitor Aluminum electrolytic ...
Types Of Capacitor - Types and Styles - Supercapacitors
... Supercapacitors, a new type of electrochemical capacitor are also called ultracapacitors ... The name is a generic term for electric double-layer capacitors (EDLC), pseudocapacitors and hybrid capacitors ... The capacitance value of an electrochemical capacitor is determined by two storage principles Double-layer capacitance – Storage is achieved by separation of charge in a ...