Wrench - Types

Types

American name British name Description Group
box-end wrench ring spanner Widely regarded as "the king of wrenches," this is a one-piece wrench with an enclosed opening that grips the faces of the bolt or nut. The recess is generally a six-point or twelve-point opening for use with nuts or bolt heads with a hexagonal shape. The twelve-point fits onto the fastening at twice as many angles, an advantage where swing is limited. Eight-point wrenches are also made for square-shaped nuts and bolt heads. Ring spanners are often double-ended and usually with offset handles to improve access to the nut or bolt. common
spark plug wrench box spanner / tube spanner A tube with six-sided sockets on both ends. It is turned with a short length of rod (tommy bar or T bar) inserted through two holes in the middle of the tube. common
combination wrench combination spanner A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt. common
open-end wrench open-ended spanner A one-piece wrench with a U-shaped opening that grips two opposite faces of the bolt or nut. This wrench is often double-ended, with a different-sized opening at each end. The ends are generally oriented at an angle of around 15 degrees to the longitudinal axis of the handle. This allows a greater range of movement in enclosed spaces by flipping the wrench over. common
flare-nut wrench
tube wrench
line wrench
crow's-foot spanner A wrench that is used for gripping the nuts on the ends of tubes. It is similar to a box-end wrench but, instead of encircling the nut completely, it has a narrow opening just wide enough to allow the wrench to fit over the tube, and thick jaws to increase the contact area with the nut. This allows for maximum contact on plumbing nuts, which are typically softer metals and therefore more prone to damage from open-ended wrenches. common
ratcheting box wrench ratcheting ring spanner A type of ring spanner, or box wrench, whose end section ratchets. Ratcheting can be reversed by flipping over the wrench, or by activating a reversing lever on the wrench. This type of wrench combines compact design of a box wrench, with the utility and quickness of use of a ratchet wrench. A variety of ratcheting mechanisms are used, from simple pawls to more complex captured rollers, with the latter being more compact, smoother, but also more expensive to manufacture. The one pictured also features a drift pin on the tail. common
Saltus wrench ? Similar in concept to a socket wrench. A Saltus wrench features a socket permanently affixed to a handle. Sockets are not interchangeable as with a socket wrench. The socket often rotates around the handle to allow the user to access a fastener from a variety of angles. Commonly a Saltus wrench is part of a double-ended wrench, with an open-end type head on the opposite side from the socket head. common
spanner wrench or simply spanner ; pin spanner / hook spanner / C spanner (or "pin face spanner") A wrench with one or several pins or hooks, designed to drive spanner head screws, threaded collars and retainer rings, shafts, and so on. Note the difference in the American and British senses of the word "spanner". In American English spanners are a subset of wrenches. common
striking face box wrench
slammer wrench
slugger wrench
hammer wrench
slogging spanner
flogging spanner
This is a specialized thick, short, stocky wrench with a block end to the handle specifically designed for use with a hammer, enabling one to impart great force. Used commonly with large fasteners, especially a nut and stud which both have index marks: the nut is screwed hand-tight, then further tightened with the striking wrench a known number of index marks calculated from the elasticity of the bolt or stud, thus giving precise torque (preload). Striking wrenches also provide shock and high force used to release large and/or stuck nuts and bolts; and when space does not allow room for a large wrench. common
adjustable wrench
adjustable end wrench
adjustable spanner
shifting spanner
shifter
The most common type of adjustable wrench in use today. The adjustable end wrench differs from the monkey wrench in that the gripping faces of the jaws are displaced to a (typically) 15 degree angle relative to the tool's handle, a design feature that facilitates the wrench's use in close quarters. The modern adjustable end wrench was invented by Johan Petter Johansson of Bahco. The incorrect use of "Crescent® wrench" to describe this design is derived from the Crescent® brand, owned by Apex Brands, Inc. Apex Tool Group, LLC. The generic term is "adjustable wrench." adjustable
monkey wrench gas grips An old type of adjustable wrench with a straight handle and smooth jaws whose gripping faces are perpendicular to the handle. historical
pipe wrench Stillson wrench or Stillsons A tool that is similar in design and appearance to a monkey wrench, but with self-tightening properties and hardened, serrated jaws that securely grip soft iron pipe and pipe fittings. Sometimes known by the original patent holder's brand name as a Stillson wrench. adjustable

socket wrench socket wrench A hollow cylinder that fits over one end of a nut or bolt head. It may include a handle, if it does not then it is often just referred to as a socket and is usually used with various drive tools to make it a wrench or spanner such as a ratchet handle, a tee bar (sliding tommy bar) bar or a knuckle bar (single axis pivot). It generally has a six-point, eight-point or twelve-point recess, may be shallow or deep, and may have a built-in universal joint. (The photo shows both ratchet and sockets.) socket
breaker bar
break-over handle
jointed nut spinner
flex head nut spinner
This tool is a long non-ratcheting bar that allows the user to impart considerable torque to fasteners, especially in cases where corrosion has resulted in a difficult-to-loosen part. socket
crowfoot wrench
crow's-foot wrench
? A type of socket designed to fit some of the same drive handles as the regular socket but non-cylindrical in shape. The ends are the same as those found on the open-end, box-end, or the flare-nut wrenches. These sockets use for use where space restrictions preclude the use of a regular socket. Their principal use is with torque wrenches. socket
ratchet wrench ratchet handle It contains a one-way mechanism which allows the socket to be turned without removing it from the nut or bolt simply by cycling the handle backward and forward. (The photo shows both ratchet and sockets.) socket
speed handle speed handle
crank handle
speed brace
A crank-shaped handle that drives a socket. The socket-driving analog of the brace used to drive a drill bit. Used instead of a ratchet in a few contexts when it can save substantial time and effort—that is, when there is a lot of turning to be done (many fasteners), ample room to swing the handle, ample access to the fastener heads, etc. Used occasionally in automotive repair or job shop work. socket
torque wrench torque wrench A socket wrench drive tool that is employed to impart a precise amount of torque to a fastener, essential in many cases during the assembly of precision mechanisms. socket
Allen wrench
Allen key
hex key
Allen key A wrench used to turn screw or bolt heads designed with a hexagonal socket (recess) to receive the wrench. The wrenches come in two common forms: L-shaped and T-handles. The L-shaped wrenches are formed from hexagonal wire stock, while the T-handles are the same hex wire stock with a metal or plastic handle attached to the end. There are also indexable-driver-bits that can be used in indexable screwdrivers. keys
Bristol wrench
Bristol spline wrench
? Another wrench designed for internal socket-head screws and bolts. The cross-section resembles a square-toothed gear. Not a common design, it is chiefly used on small set screws. keys
Torx wrench Torx key An internal socket-head screw design. The cross-section resembles a star. Commonly used in automobiles, automated equipment, and computer components as it is resistant to wrench cam-out and so suitable for use in the types of powered tools used in production-line assembly. keys
power wrench ? A broad type of wrenches that use electricity or compressed air to power the wrench. power
impact wrench/impact driver Rattle gun/impact driver A compressed air (pneumatic) powered wrench commonly used in car garages and workshops to tighten and remove wheel nuts. Includes a mechanism to provide repeating pulsed force, good for loosening stuck fasteners and also for overcoming stiction when tightening, to assure consistent tightness. power
alligator wrench ? A formerly common type of wrench that was popular with mechanics, factory workers, and farmers for maintenance, repair and operations tasks in the days when fasteners often had square rather than hex heads. The wrench's shape suggests the open mouth of an alligator. historical
cone wrench cone spanner A thin open-end wrench used to fit narrow wrench flats of adjustable bearing bicycle hubs. Called a "cone" wrench because it fits wrench flats of the cone section of a "cup and cone" hub, this tool is also used with some other adjustable hub bearings. The wrench is very thin so has little strength; to compensate, cone wrenches typically have a large head. Most bicycle front hubs use a 13 mm; most rears use 15 mm. specialty
die wrench
die-stocks
? A double-handled wrench for turning the dies used in threading operations (cutting the male threads such as on a bolt). specialty
drum key
lug wrench
drum wrench
Drum key A small, square-head socket wrench used on drum (percussion musical instrument) tuning lugs and fasteners. This key is often interchangeable with radiator bleed keys. specialty
drum wrench
bung wrench
? A tool commonly used to open bungs on large 55-gallon drums (cylindrical containers). specialty
fire hydrant wrench (hose connection) ? The hose connection has a threaded collar with a protruding pin. From the handle of the wrench an arc has at its end a loop to engage the pin. specialty
fire hydrant wrench (valve operator) ? This is a pentagonal (five-sided) box wrench. Avoiding a hex shape for the lug makes the valve tamper-resistant: with the opposite faces nonparallel, unauthorized opening of the hydrant is less likely, because the would-be opener lacks a suitable tool. specialty
curb key ? This is a wrench for opening and closing valves on municipal water pipes (often at the curb, hence the name). The valve usually has a rectangular lug and is set into the ground requiring the key. specialty
golf shoe spike wrench ? A T-handle wrench with two pins and clearance for the spike—allows removal and insertion of spikes in shoes. specialty
head nut wrench ? A flat wrench with a circular hole and two inward protruding pins to engage slots in the nut. This type of nut is used on bicycles to secure the front fork pivot bearing to the headpiece of the frame. specialty
4-way lug wrench wheel brace A socket wrench used to turn lug nuts on automobile wheels. specialty

oil-filter wrench Oil filter wrench or chain wrench A type of wrench for removing cylindrical oil filters. It may be either a strap-type wrench or a socket. specialty
plumber wrench Multigrips or multigrip pliers A tool to screw (rotate with force) various pipes during plumbing. specialty
? rigger-jigger A spanner used in attaching riggers to rowing boats with offset to allow users fingers to keep grip when flush with boat. 10 mm at one end, 13 mm at the other. specialty
sink wrench
basin wrench
basin wrench A self-tightening wrench mounted at the end of a torque tube with a transverse handle at the opposite end. Used to tighten tubing connections to washstand valves in ceramic sinks—the nuts are often located deep in recesses. The self-tightening head may be flipped over to loosen connections. specialty
spoke wrench nipple wrench or spoke key A wrench with a clearance slot for a wire wheel spoke such as a bicycle wheel and a drive head for the adjustment nipple nut. The handle is offset to make the wrench more convenient to grip, and the handle is short to fit between spokes, allowing the wrench to turn 360 degrees without being removed. specialty
spud wrench podging spanner
podger
A steel erecting tool which consists of a normal wrench at one end and a spike (drift pin) at the other, used for lining up bolt holes (typically when mating two pipe flanges). specialty
chain whip A self-tightening wrench that engages the teeth of a chain drive sprocket, and used typically to remove bicycle cogsets. Similar to a strap wrench, but uses positive engagement rather than friction, and so needs to grab only one end of the chain. specialty

strap wrench
chain wrench
strap wrench
chain wrench
A self-tightening wrench with either a chain or strap of metal, leather, or rubber attached to a handle, used to grip and turn smooth cylindrical objects (such as automotive oil filters). It relies entirely on friction between the strap or chain and the object to be manipulated. Similar to a pipe wrench, but uses a chain similar to a drive chain or strap, instead of an adjustable jaw. The links of the chain have extended pegs which fit into grooves in the front of the handle, with one end of the chain attached permanently to the handle. This is used in situations where pipe wrenches cannot maintain a proper grip on an object such as a wet or oily pipe. Larger versions of chain wrenches are sometimes known as "bull tongs" and are used with large diameter pipe such as is used deep wells. specialty
tap wrench
tap handle
T-handle
tap wrench A double-handled wrench for turning the square drive on taps used in threading operations (cutting the female threads such as within a nut) or a precision reamer. specialty
tappet wrench ? A spanner of small to moderate size constructed similarly to an open ended wrench, but with a thinner cross section. Its purpose is to apply torque to the fasteners found on the valve trains of older engines, especially automobile engines, where the valve train required adjustment of the tappets (also known as lifters). Tappets, push rods, rocker arms and similar adjustable pieces are often equipped with locknuts which are thinner than standard nuts, due to space limitations. Frequently, the hex section of the adjustment is contiguous to the lock nut, thus requiring a thinner "tappet wrench" to be used. specialty
tuning wrench tuning "T" hammer
piano tuning lever
A socket wrench used to tune some stringed musical instruments. Similar, and in some cases identical to drum tuning keys, but often provide greater torque due to the higher tension of strings. specialty
wing nut wrench A tool specifically for use with wing nuts, allowing the application of greater torque than is possible by hand. It is generally advised not to use such spanners for tightening the wing nut, but rather only for loosening. It is a "hand saver" more than anything else. specialty
graduated wrench ? An adjustable wrench with a small number (usually 2–4) of discrete sizes. This is sometimes used as an inexpensive substitute for a monkey wrench.

Read more about this topic:  Wrench

Other articles related to "types, type":

Types of Graphemes
... The principal types of graphemes are logograms, which represent words or morphemes (for example, Chinese characters, or the ampersand representing the English word and also ... For a full discussion of the different types, see Writing system Functional classification of writing systems ...
Prolog - Extensions - Types
... Attempts to introduce types date back to the 1980s, and as of 2008 there are still attempts to extend Prolog with types ... Type information is useful not only for type safety but also for reasoning about Prolog programs ...
Netwar - Network Structures
... Arquilla and Ronfeldt point to three basic types of networks that may be used by netwar actors Chain network – typified by smuggling networks, where end-to-end ... Netwar actors may also take on hybrid forms as well, blending different types of networks and hierarchies ... networked to each other through different types of network structures ...
Small Boat Anchors - Bruce or Claw Anchor
... Claw-types set quickly in most seabeds and although not an articulated design, they have the reputation of not breaking out with tide or wind changes, instead ... Claw types have difficulty penetrating weedy bottoms and grass ... have to be oversized to compete with other types ...

Famous quotes containing the word types:

    Science is intimately integrated with the whole social structure and cultural tradition. They mutually support one other—only in certain types of society can science flourish, and conversely without a continuous and healthy development and application of science such a society cannot function properly.
    Talcott Parsons (1902–1979)

    ... there are two types of happiness and I have chosen that of the murderers. For I am happy. There was a time when I thought I had reached the limit of distress. Beyond that limit, there is a sterile and magnificent happiness.
    Albert Camus (1913–1960)

    The rank and file have let their servants become their masters and dictators.... Provision should be made in all union constitutions for the recall of leaders. Big salaries should not be paid. Career hunters should be driven out, as well as leaders who use labor for political ends. These types are menaces to the advancement of labor.
    Mother Jones (1830–1930)