Hughes Tool Company

Hughes Tool Company was established in 1908 as Sharp-Hughes Tool Company when Howard R. Hughes, Sr. patented a roller cutter bit that dramatically improved the rotary drilling process for oil drilling rigs. He partnered with longtime business associate Walter Benona Sharp to manufacture and market the bit. Sharp's widow, Estelle Sharp, sold her 50% share in the company to Howard Hughes Sr. following her husband's death in 1912. The company was renamed Hughes Tool at this point.

When Hughes Sr. died in 1924, 75% of the company was left to Howard Hughes Jr., who at the time was a student at Rice University. According to Howard Sr.'s will, his son was to initially receive a 25% share, his wife 50%, and the remaining 25% was to be divided between various family members. Since Howard Sr.'s wife had died some years earlier, and the will had not been updated to reflect that, Howard Jr. automatically inherited his mother's shares. Resentful of his relatives' attempts to run the business, Howard Hughes Jr. had himself declared a legal adult (21 being the age of majority at the time), and bought out his relatives' minority share in the business.

Under Howard Jr.'s ownership, Hughes Tool ventured into the motion picture business via Hughes Productions during the 1920s, and into the airline business in 1939 with the acquisition of a controlling interest in Transcontinental and Western Air (later renamed Trans World Airlines).

In 1932, Hughes formed Hughes Aircraft Company as a division of the Hughes Tool Company. Hughes Aircraft thrived on wartime contracts during World War II (though not on the only two contracts it received to actually build airplanes), and by the early 1950s was one of America's largest defense contractors and aerospace companies with revenues far outpacing the original oil tools business. In 1953, Hughes Aircraft became a separate company and was donated to the Howard Hughes Medical Institute as its endowment. Hughes Aircraft's helicopter manufacturing business was retained by Hughes Tool Co. as its Aircraft Division until 1972.

For a period of time in the 1940s to late 1950s, Hughes Tool owned the RKO companies, including RKO Pictures, RKO Studios, RKO Theatres, and the RKO Radio Network. For a brief period in the early 1960s, Hughes Tool held a minority stake in Northeast Airlines. Hughes Tool's majority stake in TWA was sold off in 1966. Two years later, in 1968, Hughes Tool Company purchased the North Las Vegas Air Terminal.

In the late 1960s, Hughes Tool ventured into the hotel and casino business with the acquisition of the Sands, Castaways, Landmark, Frontier, Silver Slipper, and Desert Inn, all in Las Vegas. Hughes Tool also purchased KLAS-TV, Las Vegas' CBS affiliate. In the early 70's, Hughes Tool ventured back into the airline industry with the takeover of the largest regional air carrier in the western United States: Air West, renamed Hughes Airwest following the purchase. Hughes Tool also briefly owned Los Angeles Airways, a small airline operating a commuter service with a fleet of helicopters.

In 1968, Hughes Tool purchased Sports Network Incorporated and renamed it the Hughes Television Network, with Dick Bailey continuing as president.

The huge main plant for Hughes Tool located in Houston, Texas, fronting Harrisburg Blvd., had grown to be one of the biggest oil tool manufacturers in the World. It had the latest, largest, and most automated equipment for foundries, forging, heat treating, and machining anywhere. At its peak during the Texas Oil Boom, it was a center for manufacturing, design, research, metallurgy, and engineering for oil field technologies. This included tool bits and tool joints critical for oil drilling, some of the first technologies for ram blast bits for drilling in mines, geothermal drilling, and a hydraulic jackhammer known as the Hughes Impactor. It even had a fully functioning oil drilling rig inside its main research lab where any kind of rock bit could be tested on any kind of rock, up to and including granite. In 1972, Howard Hughes sold the Hughes Tool Company; it had been the consistently profitable part of his empire, and produced the profits that built all the rest from the very beginning. This became the "new" Hughes Tool Company while the remaining divisions of the business were placed in a new holding company, the Summa Corporation.

Hughes Tool merged with Baker International to form Baker Hughes Incorporated in 1987.

Other articles related to "hughes, hughes tool company, tool company, company":

Howard R. Hughes, Sr. - Early Years - Hughes Drill Bits
... Hughes engaged in various mining business endeavors before capitalizing on the Spindletop oil discovery in Texas, as a result of which he began devoting his full time to the ... On 20 November 1908, he filed the basic patents for the Sharp-Hughes Rock Bit, and on 10 August 1909 was granted U.S ... Hughes' two-cone rotary drill bit penetrated medium and hard rock with ten times the speed of any former bit, and its development revolutionized oil well drilling ...
Hughes Christensen - History
... Hughes Tool Company Hughes Tool Company was founded by Howard Hughes, Sr ... rock bit launched operations of the Houston-based Sharp-Hughes Tool Company ... Howard Hughes, Sr ...
Hughes Christensen
... Hughes Christensen, is one of the worlds largest oil and gas drilling and evaluation service companies primarily responsible for the production of drill bits ... It was formed from the merger of Hughes Tool Company and Christensen Diamond Products ... In 1987, Baker International acquired and merged with Hughes Tool Company to form Baker Hughes Incorporated ...
Glenwood Cemetery (Houston, Texas) - Notable Burials
... Cullinan, Founder of Texaco William Stamps Farish II, Co-founder, Humble Oil Company Albert Bel Fay, U.S ... Hughes, Jr, Aviator, Industrialist Howard R ... Hughes, Sr ...

Famous quotes containing the words company, hughes and/or tool:

    “Come, boys, I know there’s kindly hearts among so good a
    crowd—
    To be in such good company would make a deacon proud.
    Hugh Antoine D’Arcy (1843–1925)

    Minute after minute, aeon after aeon,
    Nothing lets up or develops.
    And this is neither a bad variant nor a tryout.
    This is where the staring angels go through.
    This is where all the stars bow down.
    —Ted Hughes (b. 1930)

    And if thou wilt make me an altar of stone, thou shalt not build it of hewn stone: for if thou lift up thy tool upon it, thou hast polluted it.
    Bible: Hebrew Exodus 20:25.