Sega Channel - Technical Information

Technical Information

The Sega Channel signal originated in Denver, CO. It was carried over the Galaxy 7 satellite, located 91.0 degrees W longitude using transponder 1 with horizontal polarization.

The uplink signal was at a carrier frequency of 1.435 GHz and occupied 8 MHz bandwidth using QPSK modulation.

The downlink signal was at a frequency of 1.1 GHz and occupied 6 MHz bandwidth using QPSK.

Subscriber Loop

  • occupied two 3 MHz non-contiguous channels
  • data rate was 6 Mbit/s
  • tunable to 68 different operating frequencies between 51 and 118 MHz
  • Bit error ratio was <10E-06
  • used Quadrature Partial Response (QPR) modulation

QPR is a modulation scheme that uses a controlled inter-symbol interference. The receiver is capable of logically decoding the signal. QPR provides 20% better bandwidth performance than QPSK with only a minor increase in signal power.

This Sega Channel adapter allowed the customer to download the game selected in less than 1 minute. The adapter contained 4 MB DRAM, which held a game of up to 32 megabits (or 4 megabytes) in size. Once the game was downloaded, it worked exactly as if it were a cartridge. Sega also had ratings for each game and supplied the parents with a password (4 digit pin#) if so desired.

Read more about this topic:  Sega Channel

Famous quotes containing the words technical and/or information:

    In middle life, the human back is spoiling for a technical knockout and will use the flimsiest excuse, even a sneeze, to fall apart.
    —E.B. (Elwyn Brooks)

    Information networks straddle the world. Nothing remains concealed. But the sheer volume of information dissolves the information. We are unable to take it all in.
    Günther Grass (b. 1927)