Aluminium Alloy

Aluminium Alloy

Aluminium alloys are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al-Si, where the high levels of silicon (4.0% to 13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.

Alloys composed mostly of aluminium and magnesium have been very important in aerospace manufacturing since the introduction of metal skinned aircraft. Aluminium-magnesium alloys are both lighter than other aluminium alloys and much less flammable than alloys that contain a very high percentage of magnesium.

Aluminium alloy surfaces will keep their apparent shine in a dry environment due to the formation of a clear, protective layer of aluminium oxide. In a wet environment, galvanic corrosion can occur when an aluminium alloy is placed in electrical contact with other metals with more negative corrosion potentials than aluminium.

Aluminium alloy compositions are registered with The Aluminum Association. Many organizations publish more specific standards for the manufacture of aluminium alloy, including the Society of Automotive Engineers standards organization, specifically its aerospace standards subgroups, and ASTM International.

Read more about Aluminium AlloyAlloy Designations

Other articles related to "aluminium alloy, aluminium, alloy, alloys, aluminium alloys":

Aluminium Alloy - Applications - Automotive Alloys
6111 aluminium and 2008 aluminum alloy are extensively used for external automotive body panels, with 5083 and 5754 used for inner body panels ... Hoods have been manufactured from 2036, 6016, and 6111 alloys ...
Aluminium Alloys
... Aluminium alloys are alloys in which aluminium (Al) is the predominant metal ... There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable ... About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions ...
List Of Discontinued Volkswagen Group Diesel Engines - Three-cylinder Diesels - 1.2 R3 PD TDI 3L
... is based on the 1.4 TDI version, but the cylinder block is made of aluminium alloy, and some of the other components are lighter ... ratio 19.51 cylinder block crankcase cast aluminium alloy (saving 16 kilograms (35 lb)) simplex-chain-driven balance shaft and oil pump, four main bearings piston and ...
Triumph Daytona 675 - Specifications
6-speed, close ratio Cycle Parts Frame Aluminium beam twin spar Swingarm Braced, twin-sided, aluminium alloy with adjustable pivot position Front wheel Cast ...
Mc Laren M2B - Design
... Mallite is a composite of balsa wood bonded between two sheets of aluminium alloy that is much stiffer than ordinary aluminium alloy, a useful ... bulkheads, on the M2B it was utilised only for the inner and upper skins, the remainder being aluminium alloy ... within 13 inches (330 mm) diameter magnesium alloy wheels ...

Famous quotes containing the word alloy:

    I live in the angle of a leaden wall, into whose composition was poured a little alloy of bell-metal. Often, in the repose of my mid-day, there reaches my ears a confused tintinnabulum from without. It is the noise of my contemporaries.
    Henry David Thoreau (1817–1862)