Reference Antenna

A reference antenna is an antenna with known performance. It is normally used to calibrate other systems.

Reference antennas are built with particular care taken to make them simple, robust and repeatable. In a common usage scenario a reference antenna would be used as a transfer standard. First the reference antenna's performance is measured using high accuracy measurement facility. This test may be done using an Electromagnetic Anechoic chamber or another type of Antenna Test Range (see Antenna Measurements). The antenna is then measured using a second antenna test facility. The results from the two are compared, the comparison can reveal the accuracy of the second test facility. It can also be used to calibrate the second facility.

Sometimes rather than measure the performance of the reference antenna theoretical methods are used. The antenna may be simulated using electromagnetic simulation, or its properties derived from formulae based on electromagnetic theory. These methods are only useful if the materials and dimensions of the antenna can be characterised very well, and the mathematics of the simulation or formulae used is known to be accurate.

Normally the parameter of interest is antenna gain. In this case the reference antenna is built to have a high degree of repeatability in its radiation pattern and boresight gain. A common practice is to measure the boresight gain of a reference antenna across its operational frequency band. Other parameters are sometimes of interest though, such as antenna efficiency.

Common reference antennas are Horns, dipoles, monopoles and Biconicals. These types are chosen because they are mechanically simple and quite electrically simple. Mechanical simplicity makes building repeatable antennas easier. Electrical simplicity makes design easier and allows use of design formulae that are known to be accurate.

Antenna types
Isotropic
  • Isotropic radiator
Omnidirectional
  • Biconical antenna
  • Cage aerial
  • Choke ring antenna
  • Coaxial antenna
  • Crossed field antenna
  • Dielectric Resonator Antenna
  • Discone antenna
  • Folded unipole antenna
  • Franklin antenna
  • Ground-plane antenna
  • Halo antenna
  • Helical antenna
  • J-pole antenna
  • Mast radiator
  • Monopole antenna
  • Random wire antenna
  • Rubber Ducky antenna
  • T2FD Antenna
  • T-aerial
  • Umbrella antenna
  • Whip antenna
Directional
  • Adcock antenna
  • AS-2259 Antenna
  • AWX antenna
  • Beverage antenna
  • Cantenna
  • Cassegrain antenna
  • Collinear antenna
  • Conformal antenna
  • Curtain array
  • Dipole antenna
  • Doublet Antenna
  • Folded Inverted Conformal Antenna
  • Fractal antenna
  • G5RV Antenna
  • Gizmotchy
  • Helical antenna
  • Horizontal curtain
  • Horn antenna
  • HRS antenna
  • Inverted vee antenna
  • Log-periodic antenna
  • Loop antenna
  • Microstrip antenna
  • Offset dish antenna
  • Patch antenna
  • Phased array
  • Parabolic antenna
  • Plasma antenna
  • Quad antenna
  • Reflective array antenna
  • Regenerative loop antenna
  • Rhombic antenna
  • Sector antenna
  • Short backfire antenna
  • Sloper antenna
  • Slot antenna
  • Sterba antenna
  • Turnstile antenna
  • Vivaldi-antenna
  • WokFi
  • Yagi-Uda antenna
Application-specific

Other articles related to "antenna, reference antenna":

Figures Used For Antenna Gain
... Published figures for antenna gain are almost always expressed in decibels (dB), a logarithmic scale ... From the gain factor G, one finds the gain in decibels as Therefore an antenna with a peak power gain of 5 would be said to have a gain of 7 dBi ... "dB" to emphasize that this is the gain according to the basic definition, in which the antenna is compared to an isotropic radiator ...
Directivity - Expression in Decibels
... is usually expressed as a decibel comparison to a reference antenna The reference antenna is usually the theoretical perfect isotropic radiator which radiates uniformly ... The calculation is therefore simplified to Another common reference antenna is the theoretical perfect half-wave dipole which radiates perpendicular to itself with a directivity of ...

Famous quotes containing the word reference:

    A sign, or representamen, is something which stands to somebody for something in some respect or capacity. It addresses somebody, that is, creates in the mind of that person an equivalent sign, or perhaps a more developed sign. That sign which it creates I call the interpretant of the first sign. The sign stands for something, its object. It stands for that object, not in all respects, but in reference to a sort of idea, which I have sometimes called the ground of the representamen.
    Charles Sanders Peirce (1839–1914)