Common-mode signal is the component of an analog signal which is present with one sign on all considered conductors. In telecommunication, common-mode signal on a transmission line is known as longitudinal voltage.
In electronics where the signal is transferred with differential voltage use, the common-mode signal is called a half-sum of voltages:
When referenced to the local common or ground, a common-mode signal appears on both lines of a two-wire cable, in-phase and with equal amplitudes. Technically, a common-mode voltage is one-half the vector sum of the voltages from each conductor of a balanced circuit to local ground or common. Such signals can arise from one or more of the following sources: Radiated signals coupled equally to both lines, An offset from signal common created in the driver circuit, or A ground differential between the transmitting and receiving locations.
Common-mode signals may be effectively eliminated by using differential amplifiers or receivers that respond only to voltage differences, e.g., those between the wires that constitute a pair. Induced common-mode signals at low (power-line) frequencies can be greatly reduced by twisting parallel wires to create twisted wire pairs.
Famous quotes containing the word signal:
“The experience of a sense of guilt for wrong-doing is necessary for the development of self-control. The guilt feelings will later serve as a warning signal which the child can produce himself when an impulse to repeat the naughty act comes over him. When the child can produce his on warning signals, independent of the actual presence of the adult, he is on the way to developing a conscience.”
—Selma H. Fraiberg (20th century)