A dynamometer or "dyno" for short, is a device for measuring force, moment of force (torque), or power. For example, the power produced by an engine, motor or other rotating prime mover can be calculated by simultaneously measuring torque and rotational speed (RPM).

A dynamometer can also be used to determine the torque and power required to operate a driven machine such as a pump. In that case, a motoring or driving dynamometer is used. A dynamometer that is designed to be driven is called an absorption or passive dynamometer. A dynamometer that can either drive or absorb is called a universal or active dynamometer.

In addition to being used to determine the torque or power characteristics of a machine under test (MUT), dynamometers are employed in a number of other roles. In standard emissions testing cycles such as those defined by the United States Environmental Protection Agency (US EPA), dynamometers are used to provide simulated road loading of either the engine (using an engine dynamometer) or full powertrain (using a chassis dynamometer). In fact, beyond simple power and torque measurements, dynamometers can be used as part of a testbed for a variety of engine development activities, such as the calibration of engine management controllers, detailed investigations into combustion behavior, and tribology.

In the medical terminology, hand-held dynamometers are used for routine screening of grip and hand strength, and the initial and ongoing evaluation of patients with hand trauma or dysfunction. They are also used to measure grip strength in patients where compromise of the cervical nerve roots or peripheral nerves is suspected.

In the rehabilitation, kinesiology, and ergonomics realms, force dynamometers are used for measuring the back, grip, arm, and/or leg strength of athletes, patients, and workers to evaluate physical status, performance, and task demands. Typically the force applied to a lever or through a cable is measured and then converted to a moment of force by multiplying by the perpendicular distance from the force to the axis of the level.

Read more about Dynamometer:  Principles of Operation of Torque Power (absorbing) Dynamometers, Detailed Dynamometer Description, Types of Dynamometers, How Dynamometers Are Used For Engine Testing, Types of Dynamometer Systems, Types of Dynamometer Test Procedures, Potential Engine Damage and Dynamometers, History

Other articles related to "dynamometers, dynamometer":

Portable Emissions Measurement System - Background
... Since the mid-19th century, dynamometers (or "dyno" for short) has been used to measure torque and rotational speed (measured in rpm) from which power ... A chassis dynamometer measures power from the engine through the wheels ... the brake horsepower measured at the crankshaft or flywheel on an engine dynamometer ...
Lester F. Larsen Tractor Museum - History
... Inside the test lab, they back the tractor into a dynamometer ... A dynamometer determines the belt horsepower of a tractor ... At the museum, they have the original dyno(which is short for dynamometer)from 1919 ...
Dynamometer - History
... The Graham-Desaguliers Dynamometer was invented by George Graham and mentioned in the writings of John Desagulier in 1719 ... Desaguliers modified the first dynamometers, and so the instrument became known as the Graham-Desaguliers dynamometer ... The Regnier dynamometer was invented and made public in 1798 by Edme R├ęgnier, a French rifle maker and engineer ...
Horse Pulling - History of The Dynamometer
... The dynamometer was first thought of after the end of World War 1, when farmers were using draft horses as the main power when tending their farms ... One machine that was created was called the Dynamometer ... The dynamometer has changeable weights that are set on a vertical track ...
Setting The Ignition Timing - Dyno Tuning
... monitoring engine power output with a dynamometer is one way to correctly set the ignition timing ... A load type dynamometer is the best way to accomplish this as the engine can be held at a steady speed and load while the timing is adjusted for maximum output ... up the ignition timing on a load type dynamometer is to slowly advance the timing until the power measured by the dynamometer does not increase anymore, then subtract 1-2 degrees for the ...