Thermocouple

A thermocouple consists of two conductors of different materials (usually metal alloys) that produce a voltage in the vicinity of the point where the two conductors are in contact. The voltage produced is dependent on, but not necessarily proportional to, the difference of temperature of the junction to other parts of those conductors. Thermocouples are a widely used type of temperature sensor for measurement and control and can also be used to convert a temperature gradient into electricity. Commercial thermocouples are inexpensive, interchangeable, are supplied with standard connectors, and can measure a wide range of temperatures. In contrast to most other methods of temperature measurement, thermocouples are self powered and require no external form of excitation. The main limitation with thermocouples is accuracy; system errors of less than one degree Celsius (C) can be difficult to achieve.

Any junction of dissimilar metals will produce an electric potential related to temperature. Thermocouples for practical measurement of temperature are junctions of specific alloys which have a predictable and repeatable relationship between temperature and voltage. Different alloys are used for different temperature ranges. Properties such as resistance to corrosion may also be important when choosing a type of thermocouple. Where the measurement point is far from the measuring instrument, the intermediate connection can be made by extension wires which are less costly than the materials used to make the sensor. Thermocouples are usually standardized against a reference temperature of 0 degrees Celsius; practical instruments use electronic methods of cold-junction compensation to adjust for varying temperature at the instrument terminals. Electronic instruments can also compensate for the varying characteristics of the thermocouple, and so improve the precision and accuracy of measurements.

Thermocouples are widely used in science and industry; applications include temperature measurement for kilns, gas turbine exhaust, diesel engines, and other industrial processes.

Read more about Thermocouple:  Principle of Operation, Grades, Types, Aging of Thermocouples, Thermocouple Comparison, Applications

Other articles related to "thermocouple, thermocouples":

List Of Dutch Inventions And Discoveries - Inventions - 1739 Pyrometer
... A simple type of pyrometer uses a thermocouple placed either in the furnace or on the item to be measured ... The voltage output of the thermocouple is read from a digital or analog meter calibrated in degrees Celsius (C) or Fahrenheit (F) ... There are many different types of thermocouple available, and these can be used to measure temperatures from -200 °C to above 1500 °C ...
Thermowell
... A temperature sensor such as a thermometer, thermocouple or resistance temperature detector is inserted in the open end of the tube, which is usually in the open air outside the process ... temperature sensor such as a thermometer, thermocouple or resistance temperature detector is inserted in the open end of the thermowell and typically spring ... So, for a grounded thermocouple spring loaded into a thermowell with a 1 inch diameter shank and a tip thickness of.25" a typical immersion length would equal 5.5 inches (1" OD x 5 ...
Thermocouple - Applications - Process Plants
... For such cases a number of thermocouple leads will be brought to a common reference block (a large block of copper) containing the second thermocouple of each circuit ...
Microwave Power Meter - Thermal
... generally be divided into two main categories, thermocouple power sensors and thermistor-based power sensors ... Thermocouple power sensors make up the majority of the thermal power sensors sold at present ... is absorbed in a load whose temperature rise is measured by the thermocouple ...
Potentiometer (measuring Instrument) - Thermocouple Potentiometer
... of the standard types was the 'thermocouple potentiometer' especially adapted for temperature measurement with thermocouples ... Potentiometers for use with thermocouples also measure the temperature at which the thermocouple wires are connected, so that cold-junction compensation may be applied to correct the apparent measured EMF to the ...